PA2640 Three Phase Harmonics & Power Analyzer
Multi-Channel & Harmonics Power Analyzer
 |
The PA2640 is a three phase power analyzer & harmonics analyzer, additionally it is three single phase power analyzers in a single chassis, several PA2640s can be slaved together. The PA2640 Harmonics & Power Analyzers may have up to 4 channels installed, which may be any combination of channel cards and with any combination of available current input options. Multiple PA2640 Harmonics & Power Analyzers can be Ethernet connected to make simultaneous multi channel measurements, useful where power analyzer measurements are needed in multiple locations, where close proximity to the load is required. Each PA2640 can be independently configured for 1ph, 2ph, 3ph 3W, 3ph 4W, multi-channel wiring configurations, signal filtering, default measurement coupling, display results smoothing and efficiency grouping. Voltage and current input channels may be optionally synchronized to each other.
Product Features:
|
General Specifications |
|
| AC and DC Voltage: | 0.03% |
| Current: | 0.03% |
| Power: | 0.05% |
| Power Factor: | 0.01 |
| Harmonic amplitude: | 0.03% |
| Phase:Phase: | 0.1° |
| For full accuracy performance and graphs refer to PA2640 Datasheet pdf | |
| Power Supply | |
| Line Power: |
|
| Environmental | |
| Storage Environment: | -20°C to 75°C (-4°F to 167°F) (non-condensing) |
| Operating Environment: | 0° to 40°C (32°F to 104°F), < 85% RH (non-condensing), Pollution Degree 2 |
| Operating Altitude: | 0 to 2000m (6560ft) ASL |
| Input Isolation Valid for any V terminal to PA2640 chassis ground; any A terminal to PA2640 chassis ground; and between V and A terminal
|
|
| Impedance: |
|
| Max Voltage: |
|
| Dimensions | |
| Nominal Dimensions: | 137mmH x 248mmW x 248mmD (5.4″ x 9.75″ x 11.2″) with feet not extended |
| Nominal Weight: | 3.2 kg (7lb) net, 5kg (11lb) shipping |
CE marked
